YES IT CAN!

You can measure moisture in solid samples including plastics, powders, ores, gooey substances that are thick and viscous, greases, and many more.  The key is sample preparation to ensure that a uniform material will be tested.  Once those details are worked out the pattern for testing is the same every time. 

You hear a lot about people running traditional Karl Fischer titration using direct injection with a syringe and needle. That’s pretty easy. 

So how do you test for moisture in solids?

For more awkward samples like a solid or solid-like substance we can evaluate the moisture using a Karl Fischer Titrator with an Evaporator Oven.

Believe it or not that’s pretty easy too. I guess that’s why we wrote this post. We wanted to let readers know that the process for running a Karl Fischer moisture test using an evaporator oven is not that difficult.  As mentioned already the most difficult part is probably working with your sample. To help show how the process works we created this short 7 minute video detailing the steps along the way. Please make note that the instruments used for this demonstration are the Karl Fischer Titrator (MKC-610DT) and the Evaporator Oven (ADP-611).

Hope you enjoy.

In the video below we show the 600 series Karl Fischer Titrator.  Today we have additional models like the MKC-710 series that work with the ADP-611 solids evaporator.

Most operators who measure moisture using a Volumetric Karl Fischer Titrator tend to have difficulty in 3 areas.   Unlike Coulometric Karl Fischer Titrators where the equipment setup and reagents are fairly straight forward, Volumetric Karl Fischer Titrators differ greatly.  Understanding how a Volumetric Karl Fischer Titrator differs and how the equipment functions is not only paramount in terms of knowing how to operate the instrument it is critical if you want to obtain accurate and repeatable results.

8 out of 10 questions we receive usually fall into one of these 3 problem areas:

1. What REAGENTS should I use for testing my samples?  Titrants, Composites, Solvents?

2. "TITER VALUE" ..Who, What, Where, Why and How?

3. "SAMPLE SIZE" ..How much do I need or should I use? 

Although these 3 areas at first may seem problematic and unrelated they are not.  In this 9-minute presentation we will explain why the burette size matters, how to calculate a correct sample size and explain how the volumetric titrator reagent strengths work.  Tying all three areas together will hopefully not only clear up some of the mysteries surrounding Volumetric Karl Fischer Titration but also empower operators with choices for conducting tests under varied conditions.  And, oh yes, obtain accurate and repeatable results every time.    Important note:1 ppm = 0.001 mg/g; 1 mg/g = 1000 ppm.